EtherWAN EN301 handleiding
Handleiding
Je bekijkt pagina 8 van 24
Ethernet Adapter
8 User’s Manual
Hardware Installation
Installing Ethernet Adapter into PCI slot
Step 1: Turn off the power to the PC.
Step 2: Remove any metal decorations from your hands and wrists.
Step 3: Remove the cover from your PC.
Step 4: Locate an empty, non-shared bus mastering PCI slot and remove the
corresponding backplate. Save the screw for use in Step 6.
<Note>
i. Do not install the Ethernet Adapter in a shared PCI slot. Avoid any PCI slot next to an
ISA slot because this is often a shared slot and does not support bus mastering.
ii. If you are going to install the Remote Wake-Up cable, choose an available PCI slot
most close to the 3-pin Remote Wake-Up connector on the PC motherboard.
iii. If you have problems in identifying a suitable slot, check your PC documentation or ask
your system administrator for help.
Step 5: Carefully insert the Ethernet Adapter into the chosen slot and press firmly
with proper push to ensure it is fully seated in the slot.
Step 6: Secure the Ethernet Adapter with the screw you saved in step 4.
<Note>
If you wish to use the Remote Wake-Up function, please complete the installation in
next section “Connecting the Remote Wake-Up Cable” before proceeding to step 7.
Step 7: Replace the PC cover.
Step 8: Proceed to “Connecting to Your Network” section.
Bekijk gratis de handleiding van EtherWAN EN301, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EtherWAN |
| Model | EN301 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1793 MB |
