EtherWAN ED3541 handleiding
Handleiding
Je bekijkt pagina 22 van 25
22
ED3541 Industrial Ethernet Extender User Guide
Interface
Specification
Description
Ethernet Port:
One 10/100BASE-TX port
Ethernet Extender Port:
One RJ-11 and Terminal Block port
DIP Switch
DIP Switch 1: Auto/Local mode
DIP Switch 2: Link down relay
LED Indicators:
Per unit: Power Status
Ethernet port: Link/Activity, Speed
Ethernet Extender port: Link/Activity, Line Speed
Auto mode: This is the factory default setting. The Extender will automatically select the
Extender port to operate in Local or Remote mode.
Local mode: Operation mode of the Extender is fixed as Local mode.
A pair of Extenders can only have one Extender set to Local mode.
Connection establishment time for Extender port:
One Extender is set as Local mode, the other is set as Auto mode: Around 40 seconds.
A pair of Extenders are set to Auto mode: Connection establishment time may be longer,
sometimes the connection establishment time may be up to a few minutes.
The data rates will vary according to the quality of the connected cable. The information
below is only for reference of applications.
Distance (m)
Data Rate (Mbps)
300
100
400
80
600
60
800
40
…
…
2600
1
This distance/data rate information is measured according testing standard in EtherWAN
laboratory. The actual installation will be affected by the quality of copper wire and the impact
of noise disturbance. The connection speed will be affected.
Bekijk gratis de handleiding van EtherWAN ED3541, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EtherWAN |
| Model | ED3541 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1815 MB |
