EtherWAN ED3541 handleiding
Handleiding
Je bekijkt pagina 17 van 25
17
ED3541 Industrial Ethernet Extender User Guide
Checking the Installation
Before you apply power:
Inspect the equipment thoroughly.
Verify that all cables are installed correctly.
Check cable routing to make sure cables are not damaged or create a safety hazard.
Be sure all equipment is mounted properly and securely.
Applying DC Power
1. Connect the DC power cord to the plug-able terminal block on the Ethernet Extender, and
then plug it into a standard DC outlet.
2. Connect the ground connection from the terminal block to the grounding surface.
When you apply power:
All green Link/Activity LEDs blink momentarily.
The green Power LED goes ON.
The Link/Activity LEDs for every port connected to a device flash, as the Hardened
Ethernet Extender conducts a brief Power On Self-Test (POST).
After the Hardened Ethernet Extender passes the POST, the Link/Activity LEDs for every
port connected to a device go ON. The Hardened Ethernet Extender is now functional and
ready to pass data.
If the Power LED is not ON, check that the power source is plugged in correctly and that the
power source is good. If this does not resolve the problem, see Chapter 3, Troubleshooting
3 Troubleshooting
Topics:
This chapter provides information about troubleshooting
the Hardened Ethernet Extender.
Troubleshooting Chart
(page 19)
Additional
Troubleshooting
Suggestions (page 20)
Bekijk gratis de handleiding van EtherWAN ED3541, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EtherWAN |
| Model | ED3541 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1815 MB |
