Handleiding
Je bekijkt pagina 18 van 36
IV. USING THE BLENDER
Pour or put the ingredients into the dish B and close the mixer with the lid C.
Set the switch
A1 to position “1-2-3” or use the position “P” pulse. The ingredients will be processed approx.
in 10 seconds to 1 minute.
Recommendation
– If you process big amounts of food, divide them in separate portions so that you do not
overload the motor unit.
– When inserting the food materials into the jar, please be aware of the order. First pour
the liquid, add food.
– It is better to use a low speed and then increase the speed.
– If the food materials are pushed toward the jar wall you set too high speed. You should
reduce speed
– Soak hard ingredients in water before processing (e.g. legume, soy beans etc.).
– You can also process hot liquids up to temperature of 70 °C, e.g. sauces, soups.
– Never fill the container with liquids which make foam (e.g. milk) up to 1500 ml so that
they do not overflow. In this case we recommend amounts max. 1000 ml.
V. MAINTENANCE
Do not use coarse and aggressive cleaning agents (e.g. sharp objects, scrapers,
diluting agents or other solvents). Clean drive unit with a soft and wet cloth with a little
detergent. Clean all accessories in hot water with a detergent right after use (you can also
wash the accessories in a dishwasher, please do not use water above 70 °C). We recommend
filling the container with warm water and a small amount of detergent, and then use 2 speed.
For easier cleaning of the mixer you can disassemble the assembled bowl. Be very careful
when cleaning the knife! Some food can colour the accessories in some way. But this does
not affect the function of the appliance and it is not a reason for a claim. This colouring usually
disappears after some time. Never dry plastic moldings over a heat source (e.g. heater,
electric / gas stove). Please make sure that the contact surface and sealing elements are
clean, undamaged and properly placed.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service!
Failure to comply with the instructions of the manufacturer
will lead to expiration of the right to repair!
The information regarding warranty and product repairs you
can find on the website www.eta.cz/servis-eu.
VI. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified on
the product or in the accompanying documentation mean that the used electric or electronic
products must not be disposed of together with municipal waste. For proper disposal of the
product, hand it over at special collection places where it will be taken over free of charge.
18
EN
/ 35
Bekijk gratis de handleiding van ETA Storio 9011 90030, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Storio 9011 90030 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 3584 MB |
