ETA Rubio 0491 90010 handleiding
Handleiding
Je bekijkt pagina 22 van 48
Floor / crevice nozzle / brush
– Connect and disconnect the accessories (B4, B5, B6) in the same way as the tube (Fig. 3).
You can connect the appliance directly to the hose handle or to the suction tube.
IV. USE OF VACUUM CLEANER
Remove all packing material, take out the vacuum cleaner and the accessories. Pull out
necessary length of power cord A10 and plug the power cord into a socket. Assemble the
vacuum cleaner accessories B (Fig. 2, 3, 4).
If the cleaner is fitted with telescopic tube B3,
adjust its length to fit your figure (Fig. 3).
Floor nozzle B1 is designed to be used to clean
carpets or smooth flooring (Fig. 5). If the floor nozzle is fitted with a brush, pull it out by
switching over a flap when vacuuming hard floorings. You can use crevice nozzle B4 for
vacuuming places that are hard to access (Fig. 6). Upholstery nozzle B5 or brush B6 can
be used to clean various types of furniture (Fig. 7, 8). The vacuum cleaner can be switched
on or off by pushing button A4 marked with the symbol
(Fig. 9). You can set the suction
power by setting the regulator A6 (Fig. 10). The minimum suction power is recommended for
fine fabrics (e.g. curtains, drapes). The maximum suction power is recommended for floor
coverings (e.g. heavy-duty carpets). After finishing work, switch off the vacuum cleaner and
unplug it from the power supply. By switching button A5 with symbol
(Fig. 9) the power
cord will be wound automatically. The vacuum cleaner can be held and carried by handle A9.
Full dust filter signaling
If the coloured field is displayed permanently on the indicator A7 (Fig. 11) while the floor
nozzle is lifted above the cleaned surface at the maximum suction power, the dust filter
A15 must be replaced. Disregard changes on the indicator during vacuuming.
Dust filter replacement
Lift off vacuum cleaner lid A3 by pushing lock A2 to the locked position (Fig. 12).
Pull out the dust filter lock A15 from the guide ribs of the holder A14 (Fig. 13) and dispose
it with common municipal waste. Slide the front part of the dust filter (in the direction of the
arrow) to holder in the suction space of the vacuum cleaner and push it to the maximum
position. Close the vacuum cleaner lid by snapping it shut. You will hear a clicking sound.
Replacing micro-filters
After replacing about 5 dust filters, micro-filters must be cleaned or replaced with new ones.
Dispose of the used dust filter and the micro-filters with common municipal waste.
You can buy replacement filters and micro-filters in electro store chain.
Suction micro-filter
Take out filter A16 by pulling it upwards (Fig. 14). Clean the filter in running lukewarm water,
e.g. using a cloth or a soft brush and let it dry completely. After drying, put the grid with a new
micro-filter in the opposite direction behind the guide ribs and slide it to the suction area of the
vacuum cleaner to the maximum position.
Exhaust micro-filter
Remove the outlet grille A12 by pressing the arrest button and folding it back
(Fig. 15).
Clean the filter in running lukewarm water, e.g. using a cloth or a soft brush and let it dry
completely.
Insert the projections on the back cover into two holes in the vacuum cleaner
cover and snap the cover.
22
GB
/ 43
Bekijk gratis de handleiding van ETA Rubio 0491 90010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Rubio 0491 90010 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 5133 MB |
Caratteristiche Prodotto
| Soort bediening | Knoppen |
| Kleur van het product | Black, Red, Silver |
| Gewicht | - g |
| Snoerlengte | 5 m |
| Geluidsniveau | 79 dB |
