ETA Profi 046790010 handleiding
Handleiding
Je bekijkt pagina 15 van 36
15
/ 31
II.EQUIPMENTANDACCESSORYOFETAVACUUMCLEANER– LINE0467 (pic. 1)
A–vacuumcleaner
A1 – suction opening A6 – outlet cover
A2 – suction space lid A7 – cord holder
A3 – lid closure A8– supply cord
A4 – safety valve A9 – The START/STOP button
A5 – handle A10 – wheels
B–accessory
B1 – floor nozzle B5 – slit nozzle
B2 – suction hose B6 – dust filter
B3 – suction tubes B7 – suction micro filter
B4 – cushion nozzle with brush B8 – nozzle for vacuuming hard floors
You can connect the appliance directly to the hose handle or to the tube.
III.PREPARATIONANDUSE
Remove all packaging material, remove the vacuum cleaner and accessory. Plug the fork
of the supply cord A8 into the el. plug. Assemble the accessory of the cleanerB1,B2,B3
(pic. 2, 3). Floor nozzle B1 is intended for vacuuming carpets or smooth floors (obr. 4).
If the floor nozzle is equipped with a brush, you may slide it out when vacuuming hard floors.
The slit nozzle B5 may be used for vacuuming hard–accessible places (pic. 5). The cushion
nozzle B4 may be used for vacuuming different kinds of furniture (pic. 6). Turn the vacuum
cleaner on/off by pressing the switch button A9 marked with “
” symbol (pic. 7). You may
control the suction power by the handle regulation on the hose B2 (pic. 8). After finishing
cleaning, unplug the cleaner from the el. outlet. Curl the supply cord into an oval shape and
put in the holder A7 (pic. 9). The cleaner may be held by the holder A5 and carried over
obstacles (e.g. doorsills, steps. We recommend turning the cleaner off when carrying.
Dustfiltercleaning
If the suction power of the cleaner decreases during operation, the dust filter needs to be
cleaned. Tip out the lid A2 of the cleaner by pressing closure A3 (pic.10). Then pull the front
of the dust filter B6 out of the holder (pic. 11). Slide out the lath from one side of the filter
(pic. 12), the textile filter will open and the dust can be dumped. The filter needs to be dusted
(pic. 13). Put the lath on reversely. Slide the front of the dust filter into the holder in the suction
space of the vacuum cleaner and push all the way. Press to close the lid of the cleaner.
Importantprecautions
– The maximum suction effect will be reached with a clean micro–filter and an empty dust filter
–
For sanitary reasons we recommend emptying the dust filter outside residential premises.
– Do not wash, soak etc. the textile dust filter, do not use a damaged textile dust filter!
– Make sure that the contact surfaces and sealing elements are functional.
Suctionmicrofilter
After filling the dust filter approx. 5 times, it needs to be changed for a new one. Loosen the
arrest ring by turning it in the direction of an arrow and remove it (pic. 14). Remove the used
micro filter and dispose it with common house waste. Put the new filter in reversely and fasten
it with the arrest ring. Make sure that the bearing area and sealing elements are functional.
ATTENTION: Neglecting the replacement of the micro filters may lead to failure of the
vacuum cleaner!
Fortrouble–freeoperationofthevacuumcleaner,pleaseusethe
testedmicro–filtersrecommendedbytheproducer.
GB
Bekijk gratis de handleiding van ETA Profi 046790010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Profi 046790010 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 3424 MB |
