ETA Massimo 3256 90000 handleiding
Handleiding
Je bekijkt pagina 19 van 44
II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A – drive unit
A1 – Button I A3 – speed regulator
A2 – Button II TURBO A4 – power cord
B – immersion mixer
C – beater
C1 – gear
D – chopping container 500 ml
D1 – central shaft D3 – container lid
D2 – sickle –shaped knifee D4 – anti–slip base
E – mixing / beating container (700 ml)
III. OPERATING INSTRUCTIONS
Remove all the packing material and take out the drive unit and the accessories. Remove
all possible adhesion foils, stick–on labels or paper from the appliance. Before the first use,
wash the parts that will be in contact with food in hot water with adetergent, rinse them
thoroughly with clean water and wipe till dry, or let them dry.
Safety switch (A1, A2), (Fig. 1)
Button I – regulated speed
Button II TURBO – maximum speed
By pushing and holding the button (A1 or A2) you will start the appliance and by releasing
the button you will switch off the appliance.
Speed regulator (A3)
By turning the speed regulator you can continuously change the speed of the motor
revolutions. The appliance will switch on with the set rotation speed when A1 button is
pressed.
Please consider the following tips for preparing food as examples and inspiration,
the purpose of which is not to provide instructions, but to show various possibilities of
preparing food. The times of food processing are only approximate and they range from
seconds to minutes. Choose the amount of the processed food so that the maximum
volume of the containers marked with the gauge line is not exceeded. Bigger amount of
processed food has to be divided into several doses and the volume of the containers has
to be checked regularly. We recommend stopping work from time to time, switching off the
appliance and removing possible food that was stuck onto the accessories.
Immersion mixer (B)
The mixer is intended for mixing and blending juices, milk shakes, milk, sauces, soups,
mayonnaise, children‘s and dietary food, for making purée, etc. Be careful, knife edges are
very sharp! Speed 1–2 can be used for processing. The maximum time of processing is 1
minute. Then wait for 10 – 15 minutes, which is necessary for the drive unit to cool down.
Insertion and removal
Slide the immersion mixer onto the drive unit Aand secure it by slight pushing and turning
19
EN
/ 43
Bekijk gratis de handleiding van ETA Massimo 3256 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Massimo 3256 90000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4024 MB |
