ETA Lunar 4238 90000 handleiding
Handleiding
Je bekijkt pagina 26 van 52
EN - 26
EN
Attention
If the rotary brush becomes clogged or blocked, turn off the vacuum cleaner, remove
the cause of the clogging/blocking and then continue vacuuming.
V. REMOVING THE DUST CONTAINER AND FILTER
DUST CONTAINER REMOVAL
When taking out the dust container B follow the procedure indicated in Fig. 2. Dispose of
dirt contained in the dust container with regular household waste. An emptied and cleaned
container is to be put back into the vacuum cleaner in reverse order.
REMOVING FILTERS
When removing the filters, proceed as shown in Fig. 2. Insert the new/cleaned filters into
the vacuum cleaner applying the reverse procedure.
WARNING
Always remove the separator B3 with the container upside down to prevent dirt from
entering the motor grille under the HEPA filter.
VI. CLEANING AND MAINTENANCE
Notes
• For hygienic purposes we recommend that you empty the container and clean the filters
after each use.
• Maximum suction power can be achieved when the filters are clean and the dustbag is empty.
• Every time you empty the dust container, we recommend that you also clean the filters.
• When you are vacuuming very fine dust, the filter pores might get clogged. This reduces
the air flow and reduces the suction power. In such a case, the filters need to be cleaned
even though the container is not full yet.
Clean the surface of the vacuum cleaner and adaptor with a soft wet cloth. Do not use any
rough and aggressive detergents!
Floor nozzle with rotary brush (C)
Remove any dirt (especially hair, animal hairs, etc.) stuck to the brush. To make cleaning easier,
the brush can be removed (Fig. 3).
Small direct-drive turbo brush (D)
Remove any dirt (especially hair, animal hairs, etc.) stuck to the brush. To make cleaning easier,
the brush can be removed (Fig. 4).
Foam filter (A5)
Gently tap or blow on the filter. The filter can also be rinsed under running water. Allow the filter
to dry thoroughly before reusing.
Bekijk gratis de handleiding van ETA Lunar 4238 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Lunar 4238 90000 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 5974 MB |
