ETA Lento 3017 90000 handleiding
Handleiding
Je bekijkt pagina 19 van 44
II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A – drive unit
A1 – button POWER (2in1) A2 – power cord
B – immersion mixer
C – beater
C1 – gear
D – chopping container 500 ml
D1 – central shaft D3 – container lid
D2 – sickle –shaped knifee D4 – anti–slip base
E – special attachment for mashing potatoes and vegetable puree (plastic finish)
E1 – knife E3 – gear
E2 – matrix
F – mixing / beating container (800 ml)
F1 – lid / anti–slip base
Typ / Accessories B C, C1 D E F
ETA3017 √ √ √ X √
ETA4017 √ √ √ √ √
III. OPERATING INSTRUCTIONS
Remove all the packing material and take out the drive unit and the accessories. Remove
all possible adhesion foils, stick–on labels or paper from the appliance. Before the first use,
wash the parts that will be in contact with food in hot water with a detergent, rinse them
thoroughly with clean water and wipe till dry, or let them dry.
Main switch button (A1), 2in1 (Fig. 1A)
By gently pushing and holding the button you will start the appliance at speed 1. Press and
hold the button harder to activate higher speed 2. By releasing the button you will switch off
the appliance.
Please consider the following tips for preparing food as examples and inspiration,
the purpose of which is not to provide instructions, but to show various possibilities of
preparing food. The times of food processing are only approximate and they range from
seconds to minutes. Choose the amount of the processed food so that the maximum
volume of the containers marked with the gauge line is not exceeded. Bigger amount of
processed food has to be divided into several doses and the volume of the containers has
to be checked regularly. We recommend stopping work from time to time, switching off the
appliance and removing possible food that was stuck onto the accessories.
Immersion mixer (B)
The mixer is intended for mixing and blending juices, milk shakes, milk, sauces, soups,
mayonnaise, children‘s and dietary food, for making purée, etc. Be careful, knife edges are
very sharp! Speed 1–2 can be used for processing. The maximum time of processing is 1
minute. Then wait for 10 – 15 minutes, which is necessary for the drive unit to cool down.
Insertion and removal
Slide the immersion mixer onto the drive unit A and secure it by slight pushing and turning
(Fig. 1B). For removing the mixer, proceed in the opposite way and remove the adapter.
19
EN
/ 43
Bekijk gratis de handleiding van ETA Lento 3017 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Lento 3017 90000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4445 MB |
