ETA Lento 1051 90000 handleiding
Handleiding
Je bekijkt pagina 25 van 56
Knife sharpener
(I)
Use:
Applicable to kitchen knives of various materials universal stainless steel.
When working, hold with one hand the hand beater and hold the knife with the
other hand. Place the blade of the knife (specifically the part nearest to the handle)
into the wheel by pressing lightly and gently pulling the knife towards you (fig. 7)
for approximately 3 or 7 seconds. Once you have performed this procedure 3 to 5
times, check that the knife has been sharpened sufficiently. Please sharpen the knife
according to the shape of the blade, and don‘t use too much force (ensure constant
force and uniform speed). Repeat the procedure until the knife has been sharpened
to the desired degree. Once you
have finished, unplug the appliance and clean knife
in hot water with a detergent right after use, rinse it in clean water and wipe till dry.
Selector level: 3
Insertion and removal
– The sharpener shaft and connect it to the respective hole in the lower part of the drive to
the maximum position (1 arrow) and secure in by turning anticlockwise (2 arrow), you will
hear a click.
– Release the sharpener by pressing the release lock button (3 arrow), and remove the
sharpener from of the hand beater.
Warning
– When sharpening the types of knives and chisels shown in picture no. 7B, do not
sharpen the blade all the way to the end, meaning all the way to the handle!
– Do not sharpen knives with oil, water and lubricants!
– Do pull backward instead of forward when the knife is in the sharpening groove.
–
In the case of very blunt knives or those with damaged blades, they will need to be
sharpened using a more aggressive method, in which case we recommend you to have
them sharpened professionally.
– Make sure that the cutting edge of the knife is not in contact
with hard objects that make
them blunt and thus they reduce their effectiveness.
V. MAINTENANCE
Before any handling with the appliance or its maintenance, switch off the appliance
and unplug the power supply cord from the electric socket. Do not use rough and
aggressive detergents! Clean the drive unit A, connecting part
F8, lid F3 and
knife
sharpener I
by soft and wet cloth with a little detergent. Make sure that water does not
get inside the appliance. Wash the other accessories right after use in hot water with a
little detergent added, rinse them with clean water and wipe them till dry (you can also
use a dishwasher). Work very carefully when cleaning the blender D and sickle –shaped
knifee F2, the knife is very sharp! Take care that the binding surfaces and the sealing
elements are functional. Make sure that the cutting edges of the blender do not come in
touch with hard objects that blunt them and
thus decrease their eectiveness.
If you wish
to remove the dust that is produced during the sharpening operation and which gathers
inside the sharpener. The appliance
shake it to remove the dust that may be present around
the opening.
Some ingredients can colour the accessories in some way.
But this does not
affect the function of the appliance and it is not a reason for a claim. This colouring usually
disappears in some time. Never dry plastic moldings over a heat source (e.g. heater,
stove, radiator).
If the power cord becomes dirty, wipe it with a damp cloth.
GB
25 / 50
Bekijk gratis de handleiding van ETA Lento 1051 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Lento 1051 90000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5703 MB |
Caratteristiche Prodotto
| Kleur van het product | Grey, White |
| Snoerlengte | - m |
| Soort | Handmixer |
| Aantal snelheden | 4 |
| Vermogen | 550 W |
