Handleiding
Je bekijkt pagina 19 van 44
EN - 19
EN
• Do not modify the appliance surface in any manner (e.g. by self-adhesive wallpapers,
foils, etc.)!
• When handling the appliance, avoid causing any injury (e.g. burns).
• Before every connection or disconnection of the appliance from power supply make sure
that switch A1 is in 0 position.
• Do not place any device with open flame in the air flow coming out from the appliance
because of danger of burning process interruption.
• Never expose yourself (or animals) to the air flow for an extended period of time. It may
cause health problems.
• Only use original components designed for this type.
• Never put fingers or other objects into inlet and outlet holes of the fan.
• Check the condition of the power cord of the appliance regularly.
• Never put the power cord on hot surfaces and never let it hang over table edge or
worktop edge. If the cord is caught or pulled, e.g. by children, the appliance may overturn
and fall down, causing a serious injury!
• Avoid winding the power cord around the appliance, otherwise the power cord service life
would be reduced.
• If you need to use an extension cord for justified reasons, it must be undamaged and
comply with the applicable standards.
• Only use this appliance for the purpose it was designed for, as specified in this manual.
Never use the appliance for any other purpose.
• WARNING: There is a risk of injury when the appliance is not used correctly (not in
accordance with the manual).
• All texts in foreign languages and pictures shown on the packaging or the product itself,
are translated and explained at the end of this language mutation.
• The manufacturer assumes no responsibility for any damage caused by improper
handling of the appliance and its accessories (e.g. electric shock, fire).
II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A – fan heater
A1 – main switch
A2 – handle for carrying
A3 – power cord
A4 – safety disconnector (in case of overturning)
B – LED touch panel
B1 – ON/OFF button
B2 – oscillation button
B3 – timer setting button
B4 – temperature setting button
B5 –
temperature intensity setting button
B6 – display backlight button
B7 – display
III. INSTRUCTIONS FOR USE
Remove all the packing material and take out the fan heater. Remove all possible adhesion
foils, stick-on labels or paper from the appliance. Place the fan heater on a suitable place.
Plug power cord connector A3 to an electric socket. Set main switch A1 to „I". Audio signal
will be heard and „--" will appear on the display B7 to indicate that the device is in standby
mode and ready for operation.
Bekijk gratis de handleiding van ETA Fogos II 4623 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Fogos II 4623 90000 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 4061 MB |
