ETA Fenix 2233 90000 handleiding
Handleiding
Je bekijkt pagina 30 van 60
HEPA filter (Fig. 8, 10)
Shake out the input HEPA filter A7 gently, or blow it out. Alternatively, use cleaning tool L
to clean it. If the HEPA filter is very dirty, you can rinse it under running lukewarm water.
Hold the filter in such a way that the pleated side points upwards and the water flows
parallel to the pleats. Hold the filter at an angle so that the water washes away the dirt
inside the pleats. Turn the filter 180° and let the water flow along the pleats in the opposite
direction. Continue this process until the filter is clean. After drying, insert the HEPA filter
back to the container in the opposite way.
Caution
–
Do not clean the filter with any aggressive washing or cleaning detergents or hot water.
–
If you clean the HEPA filter with water, its filtration properties will deteriorate. The
filter cannot be washed more than three times. After that, a new filter needs to be purchased
ETA123300010
.
– We recommend that you replace the HEPA filter twice a year.
– The filter is not dish-washer safe.
–
Failure to clean or replace the filter as required may cause a defect of the vacuum cleaner!
Storage (Fig. 12)
Store the appliance thoroughly clean on a dry, dustless place out of reach of children and
persons sui juris. Do not put the assembled rod vacuum cleaner on an uneven surface!
The cleaner must be placed on a flat surface where there is no danger of knocking over.
For easier release, put your foot on the floor nozzle D and pull the handle A9 backwards
to unlock the nozzle.
which is accompanied by characteristic sound (clicking), (fig. 13). The
appliance is now ready
for use. Insert one of the accessories (small brush E, long crevice
nozzle F) into wall bracket I.
VI. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal of the product, hand it over at special collection places where it will be received free
of charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal. Fines can be imposed
for improper disposal of this type of waste in agreement with the national regulations. The
appliance is equipped with the Li-Ion battery with long life. For environmental protection it is
necessary to remove the battery from the appliance after its service life and the battery and
the appliance must be disposed of safely using special collection networks. Ask for more
details at the local authority or at the local waste collection site.
Removing the accumulator
To remove the battery, follow the instructions indicated in Fig. 11.
After that, a new
accumulator
needs to be purchased
ETA123300060
or
ETA223300060
.
VII. TECHNICAL DATA
Protection class III.
Accumulator 25.2 V Li-Ion
30
EN
/ 58
Bekijk gratis de handleiding van ETA Fenix 2233 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Fenix 2233 90000 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6425 MB |
