ETA Fenité 1354 90000 handleiding
Handleiding
Je bekijkt pagina 14 van 32
EN - 14
EN
* A source with USB terminal may be connected to USB-C cable (for example AC power
adapter, backup power source, etc.).
III. PREPARATION FOR USE
• Remove all packaging and remove the appliance.
• Place the base
A3
on the end of the leg
A4
and turn it 90° clockwise.
• Place the mirror A with the joint on the leg
A4 until it locks in place
.
• Connect the USB-C cable to the power supply terminal A6, and connect the other side to a
power source, for example to a compatible AC power adapter, or to a backup power source.
• The operation of charging of the accumulator is indicated by a “red” indicator A5. When the
battery is fully charged, the indicator it will go off (the appliance can be used while charging).
• The standard charging time is approximately 3 hours and the fully charged accumulator
allows for the operating time of 180-240 min. (
the operating time is only approximate,
based on set regime). The operating time decreases depending on the appliance loading
and due to the accumulator ageing and wear and tear.
• To extend the lifespan of the accumulator, we recommend discharging the accumulator
completely 2x a year by normal use and then charging it fully again.
1
CLICK
3
(=5 V / 1 A)
2
IV. USE
• The main mirror provides 1X normal view and comes with a X compact mirror to attach
magnetically to the mirror face. (The 5X magnetic mirror does not illuminate). Place it on
the mirror when not in use.
• When the button is pressed shortly, the mirror lights up.
• You can select one of the three light colors or turn it off by successively pressing .
• If you long hold down the button for more than 3 seconds, you can adjust the light
intensity. (The intensity of supplementary light has memory function. When it is turned on
next time, it storage tray will remember the lamp/Brightness that was turned off last time).
• To clean the outside of the mirror, wipe with a damp cloth. Clean the mirror glass with
a glass cleaner. Do not use coarse and aggressive cleaning agents. Do not switch on
until it is completely dry.
V. ENVIRONMENT
If the dimensions allow, there are labels of materials used for production of packing, components
and accessories as well as their recycling on all parts. The symbols specified on the product or in
the accompanying documentation mean that the used electrical or electronic products must not be
disposed of together with municipal waste. For proper disposal of the product, hand it over at special
collection places where it will be taken over free of charge. Suitable disposal of the product can help
to maintain valuable natural resources and to prevent possible negative impacts on the environment
and human health, which could be the possible consequences of improper waste disposal.
Fines
can be imposed for improper disposal of this type of waste in agreement with the national
regulations.
Bekijk gratis de handleiding van ETA Fenité 1354 90000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | Fenité 1354 90000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3149 MB |
