ETA 239790001 handleiding
Handleiding
Je bekijkt pagina 109 van 194
EN
EN - 109
Drain hose Connection
• Insert the drain hose into a drain pipe with a minimum diameter of 40 mm, or let it run
into the sink, making sure to avoid bending or crimping it. Use the special plastic support.
• The free end of the hose must be at a height max. 1000 mm and must not be immersed
in water.
• Please hang up the drain hose either way of A, B.
HOW TO DRAIN EXCESS WATER FROM HOSES
• If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained
directly into the sink. It will be necessary to drain excesswater from hoses into a bowl
or suitable container that is held outside and lower than the sink.
WATER OUTLET
• Connect the water drain hose.
• The drain hose must be correctly fitted to avo id water leaks.
• Ensure that the water inlet hose is not kinked or squashed.
EXTENSION HOSE
• If you need a drain hose extension, observe to use a simil ar dr ain hose.
• It must be no longer than 4 metres; otherwise the cleaning effect of the dishw asher
could be reduced.
SYPHON CONNECTION
• The waste connection must be at a height of max.100 cm
from the bottom of the dish.
• The water drain hose should be fixed by a hose clip.
Start of dishwasher
The followings should be checked before starting the dishwasher.
1. Whether the dishwasher is level and fixed
2. Whether the inlet valve is opened
3. Whether there is leakage at the connections of the conducts
4. Whether the wires are tightly connected
5. Whether the power is switched on
6. Whether the inlet and drain hoses are knotted
7. All packing materials and printings should be taken out from the dishwasher
Bekijk gratis de handleiding van ETA 239790001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ETA |
| Model | 239790001 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 20269 MB |
