Estella 348PEM9D116 handleiding
Handleiding
Je bekijkt pagina 8 van 16
www.EstellaEquipment.com8
USER MANUAL
CONTROLS AND INDICATORS
1 - Switch positioned to kneading mode (FWD)
This position sets the machine to kneading mode; the screw rotates clockwise and conveys the product to the
bottom of the bowl.
2 - Switch positioned to extruding mode (REV)
This position sets the machine to extruding mode; the screw rotates counterclockwise and conveys the product
towards the extruder.
The screw applies pressure to the dough towards the extruder and the pasta starts drawing.
3 - Switch positioned to motor switch o mode (OFF)
In this position, the motor switches o and the machine stops.
WARNING: The electricity line is still active.
Note: To switch from kneading mode to extruding mode, switch the machine o, change the mode selection,
and turn the machine back on.
4 - “ON” button
This button must be pressed only after having set the selector switch to extruding or kneading mode. If the
switch is set to OFF, the machine will not start.
5 - “OFF” button
Stop the machine completely by removing the power supply.
WARNING!
The machine is equipped with a forced ventilation system (fan) controlled by a bi-metallic switch connected to
the motor. When the motor reaches 140°F, the fan will start automatically and run until the motor temperature
drops down to 104°F.
1
4
5
2
3
FIG. 7
Bekijk gratis de handleiding van Estella 348PEM9D116, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Estella |
| Model | 348PEM9D116 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2688 MB |
