Estella 348PEM9D116 handleiding
Handleiding
Je bekijkt pagina 16 van 16
www.EstellaEquipment.com16
USER MANUAL
The machine switches
o while preparing the
dough
The dough is too hard or sticky and
blocks the motor, causing a thermal
cutout
Empty the dough out of the bowl, press
the protection on the rear of the machine
(11) (FIG. 6), then start the machine
ISSUE CAUSE SOLUTION
Machine does
not start
The residual current circuit breaker is
set to “0”
Switch to "I"
The plug switch is set to “0” Switch to "I"
The start button does not work Contact the technical assistance service
Check that all the safety devices are
mounted and present
Check the safety devices
The selector switch is set to OFF Rotate the selector switch to REV or FWD
The motor stops after a
certain amount of time
while operating
The motor thermal protection has
triggered
Wait for the motor to cool down then
switch the machine back on
The pasta
won't come out
The pasta extruder is dirty Clean the pasta extruder
The machine is working in kneading
mode (REV)
Switch the machine o and rotate the
selector switch to extruding mode (FWD)
The fan is
not working
The fan is burned out Contact the technical assistance service
TROUBLESHOOTING
If problems persist, contact your local service center.
Bekijk gratis de handleiding van Estella 348PEM9D116, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Estella |
| Model | 348PEM9D116 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2688 MB |
