Essentiel B SP40 handleiding
Handleiding
Je bekijkt pagina 8 van 20
6
V.1.0
disassembly
Using the photo studio
/
white light
cold light
warm light
ON/OFF
1. Place the product on a flat, stable and dry surface. The round hole should be at the top of the photo
studio.
2. Choose the background (white, black, red, green, blue). Attach the chosen background on the
hooks inside the photo studio. Unfold the background carefully. Take care to avoid any creases in
order to ensure a uniform background.
3. Turn on the photo studio. Press the “ON/OFF” button once. The LED strip should light up.
4. Press the “Mode” button to toggle between the three light modes (white light, soft light, warm light).
5. Press the “Down” button to reduce the brightness of the light.
6. Press the “Up” button to increase the brightness of the light.
NOTE 1: Use the “Up” and “Down” buttons to adjust the brightness level. There are 11 brightness levels.
NOTE 2: The product includes an acrylic display stand for books and other flat objects requiring support.
disassembly
IMPORTANT: Always disconnect the power source before changing the background, moving or folding
the product.
1. Undo the wall mounting on the left and right sides.
2. First fold in the middle block of the left and right sides, then the top and finally the bottom.
3. Put the photo studio in the bag with the accessories.
cleaning
1. IMPORTANT: Always disconnect the power source before changing the background, moving or
folding the product.
2. Remove dirt with a damp cloth and iron the background to remove creases.
3. Never use detergents, chemicals or solvents, as this may change the colour of the background.
Bekijk gratis de handleiding van Essentiel B SP40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Essentiel B |
| Model | SP40 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2548 MB |
