Essentiel B ESLHP8-2b handleiding
Handleiding
Je bekijkt pagina 24 van 32
4) Progress of the cycle:
The progress of a cycle is displayed on the cycle monitoring indicator.
At the start of each new stage in the drying process, the corresponding
indicator lamp lights up and the one for the previous stage goes out. The
progression goes from the bottom to the top.
• THE ►II (START/PAUSE) LAMP:
The indicator is lit when the dryer is running; it flashes when the appliance is paused.
• THE (DRYING) LAMP:
This indicator is lit during the drying process until the drying level reaches the “Easy
iron” level.
• THE (EASY IRON) LAMP:
This indicator lights up when the drying level reaches the “Easy iron” level and stays on
until the “Ready-to-wear” drying level is reached.
• (READY-TO-WEAR) LAMP:
This indicator lights up when the drying level reaches the “Ready-to-wear” level and
stays on until the next level.
• THE (END/ANTI-CREASE) LAMP:
This indicator lights up when the drying programme is finished and the anti-crease
function is activated. The dryer spins the laundry every 10 minutes to prevent creasing.
Changing a programme that is running
1. Select another programme by turning the programme selector knob.
2. Press the ►II (Start/Pause) button to start the new programme.
Note
: The child lock must not be enabled if you wish to change or cancel a programme
that is running. If the child lock is enabled, disable it before performing these operations.
Adding/removing laundry during a programme
To add or remove laundry after starting a programme:
1. Press the ►II (Start/pause) button to “pause” the appliance. The drying process will
be interrupted.
2. Open the door. Add or remove laundry, and then close the door.
3. Press the ►II (Start/Pause) button to restart the programme.
• Laundry added during the drying process may cause the laundry already dried in the
machine to mix with wet laundry. This will result in the laundry remaining wet at the
end of the drying process.
• Laundry can be added or removed as often as you wish during a drying cycle.
However, this will cause the drying process to be interrupted repeatedly and will
lengthen the duration of the programme, resulting in higher energy consumption. For
this reason, we do not recommend adding or removing laundry once the programme
has been started.
• If you select a new programme by turning the programme selection knob while the dryer is
paused, the current programme will end.
• WARNING: Do not touch the inner surface of the drum when adding or removing
laundry during a programme because it is hot.
Child safety
The child lock prevents the programme from being interrupted by locking the buttons
while a programme is running.
The dryer door as well as all the buttons, except the appliance stop (by turning the
programme selection knob), are disabled when the child lock is activated.
− To activate the child lock:
Simultaneously press and hold down the (Buzzer/Timer) and (Drying
Level) buttons for 3 seconds. An audible tone sounds when the safety is activated and
the indicator lamp is lit.
• When you turn the programme selection knob or press a button, you will hear audible
signals to inform you that the child lock is activated.
• To start a new programme at the end of the previous one or to interrupt the
programme, you must disable the child lock.
− To disable the child lock:
Simultaneously press and hold down the (Buzzer/Timer) and (Drying
Level) buttons for 3 seconds.
The child lock is also disabled when you switch the appliance off and on again by
turning the programme selection knob to the (off) position.
46
47
EN
Bekijk gratis de handleiding van Essentiel B ESLHP8-2b, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Essentiel B |
| Model | ESLHP8-2b |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 5057 MB |