Essentiel B ERSC-4262b handleiding
Handleiding
Je bekijkt pagina 12 van 31
22
23
EN
- low heating power if the room temperature is between 18°C and 25°C;
- off if the room temperature is above 25°C (it enters standby).
To turn off the Eco mode, press the button (13) again. The most recently selected
settings are reactivated.
Notes
:
- The control panel shows the set temperature and not the temperature in the room.
- If you press and hold the + (25) or - (24) button, the numbers will cycle through faster.
7. Screen Light On/off
Press the button (15) to turn the screen light on or off.
8. Programming a delayed shutdown
This function is used to set the operating time after which the device will automatically
shut down.
1. With the device plugged in and operating, press the timer control
button (22). The light (14) appears and the display (19) flashes.
You then have 3 seconds to set your choice of duration between 1 and
24hours using the + (25) and - (24) buttons.
2. Once the selected duration elapses, the device automatically shuts
down and enters standby mode.
Note
: The control panel alternates between showing the set temperature and the timer
countdown.
3. To change the timer, push the button (22) and use the + (25) and - (24) buttons
to set another timer.
4. To turn off a timer, push the - button (24) until the display reads “0”, which
indicates that no timer is on.
9. Programming a delayed start
This function is used to set the time after which the device will automatically turn on.
1. With the device plugged in and the main switch (9) in the “I” position (on), turn the
appliance on using the on/standby mode button (10).
4. Oscillation
Press the oscillation button (16) if you want to enable oscillation:
the device beeps once and oscillates from left to right and back at an
80° angle; the light (20) appears on the control panel. To stop the
oscillation, press the button (16) again.
5. Power selector/anti-freeze mode
Press the power selector/anti-freeze mode button (11)once or
several times to switch from the lowest power to the highest power,
then to the anti-freeze mode and so on.
1) To set the heating power:
- For the lowest heating power, the light (19) is displayed on the control panel.
- For the highest heating power: the light (18) is displayed on the control panel.
2) For the anti-freeze mode: the light (17) is displayed on the control panel.
The device automatically maintains the room temperature at 7°C. If the room temperature
is high, the heater enters standby mode.
In the anti-freeze mode, you cannot change the default temperature (7°C).
6. Adjusting the temperature/Eco mode
1) Push the temperature control button (13) once. The
display (12) flashes. You then have 3 seconds to set your choice of
temperature between 15 and 35°C using the + (25) and - (24) buttons.
The temperature is saved automatically after 3 seconds and the
display stops flashing.
When the desired temperature is reached, the device stops running. It automatically
restarts when the temperature in the room drops again.
2) Push the button (13) a second time to switch to Eco mode. The light (22)
appears on the control panel.
The Eco mode allows the heating power to be set automatically, without your
involvement, using a temperature sensor that detects the temperature in the room in
order to save energy.
The device automatically selects:
- high heating power if the room temperature is below or equal to 18°C;
Bekijk gratis de handleiding van Essentiel B ERSC-4262b, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Essentiel B |
| Model | ERSC-4262b |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2837 MB |
