Essentiel B ERA 553 handleiding
Handleiding
Je bekijkt pagina 30 van 84
before use
30
V.4.0
before use
Assembling the wheels
WARNING: Please completely assemble the air
cooler before switching it on.
Insert the two front wheels (with an extra tab) into the front supports and the two rear wheels
into the rear supports underneath the unit.
Filling the water tank
To activate the “Cool Air” function, you have to fill the air cooler’s tank (7).
Please follow these steps:
1. Make sure that the unit has been turned off and unplugged from the power point for at
least 3 minutes.
2. Press the tab on the tank to release it, and then remove it from its housing.
3. Insert the two ice packs that you have taken out of the freezer into the tank. This will
produce even cooler air.
4. Fill the water tank with cold tap water, making sure that the water level is between the MIN
and MAX marks on the tank.
5. Put the tank in back its housing and make sure it is properly positioned to prevent any risk
of leakage. Also make sure that the tank’s filter is in its housing.
Please note: the “Cool Air” function cannot operate without water. When the water
tank is empty and the “Cool Air” function is activated, the unit beeps and the indicator
lamp for the “Cool Air” button flashes on the control panel. The function is automatically
disabled.
Front wheel (x 2)
Rear wheel (x 2)
Bekijk gratis de handleiding van Essentiel B ERA 553, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Essentiel B |
| Model | ERA 553 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 6608 MB |