ESI Waveterminal 2496 handleiding
Handleiding
Je bekijkt pagina 13 van 38
14
SPDIF_EXT *WT2496’s number (1,2) I ndicates signal (1) a nd ground (2).
SB Live Value WT2496
Front ch out. S/B_DIN
1 ----------------------------------------------------1
2 ----------------------------------------------------2
or
Rear ch out S/B_DIN
12 -------------------------------------------------- 1
10 -------------------------------------------------- 2
*using the front channel is recommended.
Digital In S/B_DOUT
6 --------------------------------------------------- 1
5 ---------------------------2
6. CD-ROM Digital Audio Input
If your CD-ROM is equipped with a 2-pin digital audio output (usually named “D” for signal
and “G” for ground), you can bypass all DAC circuitry of the CD-ROM and import the CD
digital audio signal directly to the WT2496 via this connector. To use the CD-ROM’s digital
audio as your digital input source, select CD-ROM
as the Digital Input selection on the
WT2496 Control Panel.
When you connect CD-ROM to monitor an audio CD through the Waveterminal 2496,
make sure to match the signal pin to the corresponding signal pin. For example, the left pin
of the 2-pin header connector is a signal pin, so connect it to the letter “D” from the CD-ROM
digital output port. Some CD-ROM models simply do not support the digital out port for
CD audio. If you cannot hear any sound from the CD-Rom after making the proper settings,
you may need to ask to the CD-ROM manufacturer if the Digital Output port is in fact
activated.
Bekijk gratis de handleiding van ESI Waveterminal 2496, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ESI |
| Model | Waveterminal 2496 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6320 MB |
