ESI MaXiO 032 handleiding
Handleiding
Je bekijkt pagina 9 van 52
MaXiO System Manual
9
2.2.5 Back Panel Clock Section
Word Clock Input
The Word Clock input allows you to synchronize EX8000 with other devices. When
EX8000 is connected to a Word Clock source, EX8000 will synchronize to it.
2.2.6 Analog Outputs & Inserts
Headphone
You can monitor the playback signal from output 1, 2 through the headphone
output. The output level can be adjusted with the volume pot.
Inserts
The inserts allow you to use the microphone preamps of EX8000 for incoming signals, and then
run the signal through external hardware processors or effects before the AD-converter digitizes
the signal. In order to use the inserts, you typically need an "insert-
cable" with a 1/4" TRS connector on one and two 1/4" mono
connectors on the two other ends. Here is a description of the insert
connector:
- Tip: return signal (input from effect processor)
- Ring: send (output to effect processor)
- Sleeve: common ground
Analog Balanced TRS Output Connectors
EX8000 has 8 balanced/unbalanced analog outputs (-10dBV) with TRS connectors.
Analog Balanced XLR Output Connectors
EX8000 has 8 balanced analog outputs (+4dBu) with XLR connectors.
21
8
14
15
16
Bekijk gratis de handleiding van ESI MaXiO 032, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ESI |
| Model | MaXiO 032 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15186 MB |
