ESI ESU1808 handleiding
Handleiding
Je bekijkt pagina 10 van 23
ESU1808 ESI
4. Driver Installation
Before installing the drivers of ESU1808, we recommend to check on the download section of
www.esi-audio.com for updated drivers.
4.1 Windows
Switch off ESU1808 via the power switch on the rear panel before you install the driver. Then
launch setup.exe from the Windows folder of the included driver CD or from a download of a recent
driver from our website.
You will now see a dialog as shown on the left picture below. Click Next. The installer now informs
you that the driver installation will start as shown on the right picture below. Confirm this with Next.
During the following process you will see a dialog box several times that informs you that the
driver software has not passed Windows Logo testing. Please be assured that our drivers have been
tested in various different ways and are OK to be used. Confirm
any such dialog with Continue
Anyway.
You will now be prompted to switch on the hardware on the next dialog that is shown above on the
right. Plug in ESU1808 and switch on the unit with the power switch. Do
not click Next yet.
10
Bekijk gratis de handleiding van ESI ESU1808, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ESI |
| Model | ESU1808 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4216 MB |
