Escort Redline 360c Ci handleiding
Handleiding
Je bekijkt pagina 13 van 18
Operation
Operation
24 25
Shifters Receive/Shift*/Shift4/ Receive = receive-only
Shifter mode
Shift6/Shift8/Shift10/Off Shift4/6/8/10 puts shifters in receive-only mode after 4/6/8/10 seconds
from receiving an alert
NOTE: only available when VX shifters are connected
Marker Enables Default* Default settings
Modified Customize the types of locations you
want alerted to
Press MUTE to go from Press Up or Down to change your
one category to the next setting within a category
Other On* /Off Other location
Redlight On* / Off Red light camera
Red & Speed On* / Off Red light & speed camera
Speed Camera On* / Off Speed camera
Speed Trap On* / Off Speed trap
Air Patrol On / Off* Known aircraft patroled areas
NOTE: User cannot mark an Air Patrol location
Clear Locations Marked Clear all user-marked locations. Press MUTE button to confirm
Lockouts Clear all lockouts. Press MUTE button to confirm
Defender Clear all DEFENDER Database data. Press MUTE button to confirm
Format Clear DEFENDER Database, all markers, and all lockouts.
Press MUTE button to confirm
Wi-Fi On* / Off Allows connection to a Wi-Fi hotspot
Bluetooth On* / Off Allows connection to the Drive Smarter app
Auto Update Off / Database/ Automatically checks for the selected updates when connected to a Wi-Fi
hotspot
Firmware/All*
WiFi Update Database/Firmware Perform an update to the selected software
*Default Setting
Notes: For descriptions
of features and functions
available when connected to
Drive Smarter
®
, visit
EscortRadar.com
To view serial number and
software revision press MRK
and SEN while powering on
detector.
To restore ESCORT Redline
Ci to its original factory
settings, press and hold
MRK and BRT while turning
the power on. A Restored
message will display, ac-
knowledging the reset.
PROGRAMMING MENU
Overview
To access the programming menu, press the SEN and BRT buttons. Press the SEN button to changed
the selected menu item. Use the - or + button to change the setting on the selected menu item. Press
the SEN button again to return to the selected Menu item.
To exit Programming, press the power button or simply wait a few seconds without pressing any
buttons. A “Completed” message will display, conrming your selection(s).
Restore Factory Settings
To restore Redline
Ci-c
to its original factory settings:
• Press and hold MRK and BRT while turning the power on.
• Restore Factory Settings? will display.
• Press the MUTE button to conrm. To cancel, wait 10 seconds.
• Factory Settings Restored will display and
Redline Ci-c
will reboot.
• You will be prompted to select your Time Zone and the Daylight Saving Time setting.
The following is a list of all settings available in the Programming menu followed by detailed descriptions
of each setting.
Serial Number and Software Version
To view your
Redline Ci-c
’s serial number and software revision, press and hold the MRK and MUTE
buttons while powering on the detector.
User Mode
Advanced Access and customize all settings and preferences.
Novice Access and customize only Units (English or metric) and Display
Color. All other preferences are set to factory defaults. To view all
settings and preferences, you must switch to Advanced mode.
Bekijk gratis de handleiding van Escort Redline 360c Ci, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Escort |
| Model | Redline 360c Ci |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7927 MB |
