Escort Passport SRX handleiding
Handleiding
Je bekijkt pagina 6 van 14
Controls and Features
KA
|
X
'''
Here ExpertMeter shows 1 strong Ka-
band signal, and three weak X-band signals.
X
On very weak signals, there will not be a
vertical line at all. This shows a very weak
X-band signal.
ExpertMeter Details
The band designators (X, K, Ka) will
stay on the display for a few seconds after
the signal has passed. This allows you to see
what the unit detected, even on very brief
signals.
However, the vertical lines representing
individual signals continuously change
(several times a second) to give you a
continuous view of the signal strength of all
radar signals present.
SpecDisplay
PASSPORT’s new SpecDisplay option is also
designed for the advanced detector user. In
this mode, PASSPORT will display the actual
numeric radar frequency being received.
K 24.150
Display shows a K-band signal at
24.150 GHz.
Ka34.700
Display shows a Ka-band signal at
34.700 GHz.
X 10.525
Display shows a X-band signal at
10.525 GHz
.
Note: Even long-time detector users
will require a significant amount of
time to get familiar with this new level
of information.
Laser Shifters
™
Your PASSPORT SRX is equipped with a
total of three Laser Shifters* (2 front, 1 rear).
These Laser Shifters are shipped from
the factory in the “receive only” mode.
If you prefer, you or your installer can
program them to “Shift” an incoming laser
signal when it is received. See the
programming section for details.
When PASSPORT is in receive only
mode (factory default), and detects laser
from the front, the display will show
F LASER. When PASSPORT detects laser
from the rear, the display will show R LASER
.
When PASSPORT has been
programmed to “Shift,” the display will
show F LASER – SHIFTING when a signal
is received from the front, or R LASER –
SHIFTING when a signal is received from
the rear.
This message will be accompanied by
the normal Laser alert tone.
*This feature may be limited or prohibited in some jurisdictions.
Check applicable laws before using.
8 9
How to customize PASSPORT with EZ-Programming
There are 9 user-selectable options so you
can customize your PASSPORT for your
own preferences. The buttons that are
normally used for CITY and MUTE are used
to enter the Program Mode, to REVIEW
your current program settings, and to
CHANGE any settings as desired. Pages
11-
13 explain each option in more detail.
How to use EZ-Programming
1 To enter Program Mode, press
both buttons and hold for 2 seconds.
PASSPORT will beep twice and display
Program. Brightness is at maximum
during programming.
2 Then press the REVIEW button to
review the current settings. You can either
tap the button to change from item to item,
or hold the button to scroll through the items.
3 Press the CHANGE button to change
any setting. You can either tap the button
to change from setting to setting, or hold
the button to scroll through all the options.
4 To leave the Program Mode, simply
wait 8 seconds without pressing any
button. The unit will display
Complete
beep 4 times, and return to normal operation.
To quickly return to all of the factory
defaults, press and hold the CITY and
MUTE buttons while turning on the unit.
A reset message will be displayed.
An example
For example, here is how you would turn
PASSPORT’s AutoMute feature off.
1 Enter the Program Mode by holding
both the CITY and MUTE buttons down for
2 seconds. PASSPORT will beep twice and
display Program.
2 Press and hold the REVIEW button.
PASSPORT will scroll through the
categories, starting with Display (
Disp),
then Pilot Light (
Pilot), then Power-on
sequence (
PwrOn), then Signal strength
meter (
Meter), then AutoMute (aMute).
3 Release the REVIEW button when
PASSPORT shows the AutoMute item. Since
the factory setting is for AutoMute to be
on, PASSPORT will display aMute ON.
If you accidentally don't release the
Review button in time, and PASSPORT
goes to the next category, hold the Review
button down again, and after PASSPORT
scrolls through all categories, it will begin
again at the top of the list.
4 Press the CHANGE button to change
from
aMute ON to aMute OFF.
5 To complete the Programming, simply
wait 8 seconds without pressing any
button. PASSPORT will display Complete,
beep 4 times, and return to normal
operation.
Bekijk gratis de handleiding van Escort Passport SRX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Escort |
| Model | Passport SRX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3206 MB |
