Esab EPR-X1 handleiding

Handleiding

1234567891011121314151617181920/ 20

Afdrukken

Je bekijkt pagina 3 van 20

NOISE -- Excessive noise can damage hearing

Protect your ears. Wear approved ear protection if noise level is high.

FUMES AND GASES -- Fumes and gases can cause discomfort or harm,

particularly in conned spaces. Shielding gases can cause asphyxiation.

Therefore:

1. Keep your head out of the fumes. Do not breathe the fumes and gases.

2. Always provide adequate ventilation in the work area by natural or mechanical

means. Do not weld, cut or gouge on materials such as galvanized steel, stainless

steel, copper, zinc, lead beryllium or cadmium unless positive mechanical ventilation

is provided. Do not breathe fumes from these materials.

3. Do not operate near degreasing and spraying operations. The heat or arc can react

with chlorinated hydrocarbon vapors to form phosgene, a highly toxic gas and other

irritant gases.

4. If you develop momentary eye, nose or throat irritation while operating, this is an

indication that ventilation is not adequate. Stop work and take necessary steps to

improve ventilation in the work area. Do not continue to operate if physical discom-

fort persists.

5. Refer to ANSI/ASC Standard Z49.1 for specic ventilation recommendations.

FIRES AND EXPLOSIONS -- Heat from ames and arcs can start res. Hot

slag or sparks can also cause res and explosions. Therefore:

1. Protect yourself and others from ying sparks and hot metal.

2. Remove all combustible materials well away from the work area or cover the materials

with a protective non-ammable covering. Combustible materials include wood, cloth,

sawdust, liquid and gas fuels, solvents, paints and coatings paper, etc.

3. Hot sparks or hot metal can fall through cracks or crevices in oors or wall openings

and cause a hidden smoldering re or res on the oor below. Make certain that such

openings are protected from hot sparks and metal.

4. Do not weld, cut or perform other hot work until the work piece has been completely

cleaned so that there are no substances on the work piece which might produce am-

mable or toxic vapors. Do not do hot work on closed containers, they may explode.

5. Have re extinguishing equipment handy for instant use, such as a garden hose, wa-

ter pail, sand bucket, or portable re extinguisher. Be sure you are trained in its use.

6. Do not use equipment beyond its ratings. For example, an overloaded welding cable

can overheat and create a re hazard.

7. After completing operations, inspect the work area to make certain there are no hot

sparks or hot metal which could cause a later re. Use re watchers when necessary.

!

CAUTION

This product is solely intended for arc welding.

!

CAUTION

Class A equipment is not intended for use in residential locations

where the electrical power is provided by the public low-voltage

supply system. There may be potential di󰀩culties in ensuring

electromagnetic compatibility of class A equipment in those lo-

cations, due to conducted as well as radiated disturbances.

1234567891011121314151617181920/ 20

Bekijk gratis de handleiding van Esab EPR-X1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd