Ermenrich Tunn PD20 handleiding
Handleiding
Je bekijkt pagina 5 van 20
5
Screwdriver Bits
PH000, PH00, PH0, PH1, PH2 SL1.5, SL2.0, SL3.0, SL4.0 T2, T3, T4
T5H, T6H, T8H, T10H, T15H P2 (Pentalobe 0.8), P5 (Pentalobe 1.2) H1.5, H2.0
2.3
U2.6
Y1
Specications
Magnetic bits 24 pcs
Rotation clockwise, counterclockwise
Rotation speed 300r/min.
Operating humidity range 20–70%
Operating temperature range -10... +50°C (+14… 122°F)
Electric torque 0.3–0.45Nm
Manual torque 3Nm
Auto-off 2 min.
Power supply 350 mA·h, 3.7V rechargeable lithium battery
USB slot for battery charging Type-C
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
Care and maintenance
Do not allow the device to get wet. If using the device in an electrostatic environment, install an electrostatic ring to
demagnetize the magnetic bits to avoid accidents. In order to avoid an accidental injury, do not put the device
in your pocket or bag.
Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local
specialized service center. Protect the device from sudden impact and excessive mechanical force. Do not use the product
in explosive environment, close to flammable materials. Store the device in a dry cool place. Only use accessories and spare
parts for this device that comply with the technical specifications. Never attempt to operate a damaged device or a device with
damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately.
Battery safety instructions
The device is equipped with a rechargeable lithium battery. This avoids frequent battery replacement. Always switch
the device off when not in use. If the battery charge is low, please recharge the device intime to ensure that
the measurements are accurate. Do not overheat the battery. Do not discharge the battery completely.
Ermenrich Warranty
Ermenrich products, except for their accessories, carry a 5-year warranty against defects in materials and workmanship.
All Ermenrich accessories are warranted to be free of defects in materials and workmanship for six months from the purchase
date. The warranty entitles you to the free repair or replacement of the Ermenrich product in any country where a Levenhuk
office is located if all the warranty conditions are met.
For further details, please visit: ermenrich.com
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.
Bekijk gratis de handleiding van Ermenrich Tunn PD20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ermenrich |
| Model | Tunn PD20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2122 MB |
