Ermenrich PL40 handleiding
Handleiding
Je bekijkt pagina 7 van 45
7
For example (Fig. 9):
a1 = 1.937m
b1 = 1.689m
so the difference (d) is a1 – b1 = 0.248.
Figure 9
Place the device at a distance of 1m from rod A. Measure the height of the rod A (value a2 in Fig. 10). Calculate the following
equation: b2' = a2 – d. Then, measure the height of rod B (b2). If the deviation between b2' and b2 is over 3mm, the crosshairs
should be calibrated.
For example:
a2 = 1.724m
d = 0.248
so b2' is: a2 – d = 1.476
Figure 10
Take off the eyepiece cover (12). Turn the adjusting screw with the pin (Fig. 11) until the values b2' and b2 are the same. Put on
the eyepiece cover again.
Figure 11
Specifications
Magnification 32x
Working distance 120m
Height accuracy for individual measurement 1.6mm/30m
Standard deviation per 1km double leveling 1mm
Objective aperture 36mm
Image erect
Field of view 1°30'
Close focus 0.3m
Compensator range ±15'
Bekijk gratis de handleiding van Ermenrich PL40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ermenrich |
| Model | PL40 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6190 MB |
