Ermenrich Ping ES20 handleiding
Handleiding
Je bekijkt pagina 4 van 27
4
1. Cut the damaged sensor from
the wire.
2. Peel o 5mm of insulation
from the wire.
3. Put thin copper tubes on to
tighten the cores.
4. Put small heat-shrinkable
tubes on.
5. Cut the sensor connectors to
make it 5mm long.
6. Insert the sensor connectors
into the copper tubes using
pliers. Heat-shrinkable tubes
must cover the copper tubes
with the sensor tips inside.
7. Heat the heat-shrinkable
tubes with a lighter.
8. Put on the protective cover
and put a drop of 502 glue.
9. Put on a large heat-shrinkable
tube and heat it with a lighter.
10. The sensor replacement is
completed.
Specications
Application PVC/plastic/steel/copper/cement/iron pipes
Distance non-metal pipe: 0–400mm / metal pipe: 0–150mm
Cable length 20m
Waterproof probe IP67
Operating frequency 300Hz
Auto-o transmitter: 1h
receiver: 30min
Operating temperature range +10…+40°C (operating), –10…+50°C (storage)
+50…+104°F (operating), +14…+122°F (storage)
Power source
transmitter: 3.7V, 2600mA∙h built-in lithium battery (18650)
receiver: 3.7V,1400mA∙h built-in lithium battery
5V, 1A DC adapter (not included)
dual Type-C USB-cable (included)
Battery life transmitter: 10h
receiver: 5h
The manufacturer reserves the right to make changes to the product range and specications without prior notice.
Care and maintenance
Do not exclusively rely on the detector to locate items behind scanned surfaces. Do not try to disassemble the device on your own for any
reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact and
excessive mechanical force. Store the device in a dry cool place. Only use accessories and spare parts for this device that comply
with the technical specications. Never attempt to operate a damaged device or a device with damaged electrical parts! If a part of the
device or battery is swallowed, seek medical attention immediately.
Battery safety instructions
Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one
time; taking care not to mix old and new ones or batteries of dierent types. Clean the battery contacts and also those of the device prior
to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment
that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high
temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch o
devices aer use. Keep batteries out of the reach of children, to avoid the risk of ingestion, suocation, or poisoning. Utilize used batteries
as prescribed by your country’s laws.
Bekijk gratis de handleiding van Ermenrich Ping ES20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ermenrich |
| Model | Ping ES20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8598 MB |
