Ergotron DM10-1002-1 handleiding
Handleiding
Je bekijkt pagina 10 van 13
10 of 13
10
5
10
1-10
4
9
3
8
2
7
1
6
16
27
38
49
510
ENGLISH
888-61-092-G-00 rev. B • 06/14
Tablet Charging
NOTE: The power cord acts as the connect/disconnect device switching power o and on. The socket
outlet shall be installed near the equipment and shall be easily accessible.
NOTE: If module is syncing all ISIs will be green.
Power Indicator – Communicates sync and charge status with the following signals:
Individual Status Indicators (ISI) – Sequentially numbered LEDs (1 - 10) corresponding to each tablet slot in the unit:
LED - Indicators
To begin charging the tablets, plug in the power cord.
The power cord is used to turn the power on and o . Charging occurs whenever the power cord is connected
UNLESS a Macintosh® or PC notebook USB cable is connected for syncing.
Light Description
O No power to the module.
On - solid iPad devices are charging.
On - slow blink Computer is plugged into USB port and iPad devices are ready to sync or are syncing.
On - fast blink Fault Status. Please make sure all cables are seated correctly and product is operating within
speci ed operating temperature. Can also indicate a failed 30 pin or lightning cable. Contact
Ergotron Customer Support if problem continues.
Light Description
Green Fully charged.
Amber
Charging in progress.
O No device connected.
Bekijk gratis de handleiding van Ergotron DM10-1002-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ergotron |
| Model | DM10-1002-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2102 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Grey |
| Breedte | 590 mm |
| Diepte | 102 mm |
| Hoogte | 809 mm |
| Snoerlengte | 1.8 m |
