ErgoAV ERMLX2-01B handleiding
Handleiding
Je bekijkt pagina 9 van 45
02 03 04 05 06 07 08 09 10 11
• Avoid the risk of personal injury or property damage! Tighten the lag
screws only until they are pulled firmly against the wall plate (DO NOT
overtighten). DO NOT use a drill; only use a socket wrench.
• DO NOT use wall anchors for this mounting option.
For mounting on wood stud walls, go to Option A on page 08 to 10.
For mounting on concrete and concrete block walls, go to Option B on page 11 to 12.
WARNING:
Tools Needed (Not Included)
7/32″ (5.5mm)
Wood Drill BitStud Finder Awl
Electric Drill Pencil Tape Measure
1/2″ (13mm)
Socket Wrench
Wall Anchor
A2
A1
A2
STEP 2 Mount the Wall Plate on the Wall
Option A
For Wood Stud Installation
• 16"-16" wood stud go to page 09
• 16" or 24" wood stud go to page 10
Supplied Parts and Hardware for Step 2
Wall Plate Template
04 x 1
Wall Plate
03 x 1
ST 5/16 x 2 3/4″
Lag Screw
A1 x 6
12 13
This anchor is for concrete and
concrete block walls ONLY. DO NOT
use them in drywall or wood studs.
CAUTION!
Wall Anchor
A2 x 6
16″(406mm)
24″(610mm)
≤5/8″ (16mm)
Nominal: ≥2″ (51mm)
Actual: ≥1 ½″ (38mm)
Nominal: ≥4″ (102mm)
Actual: ≥3 ½″ (89mm)
14
Level
15
Bekijk gratis de handleiding van ErgoAV ERMLX2-01B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ErgoAV |
| Model | ERMLX2-01B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5698 MB |
