ErgoAV ERDS1-01G handleiding
Handleiding
Je bekijkt pagina 10 van 35
Using the Control Panel
Controller
Sedentary Reminder Key
(Left Key)
M Key
(Right Key)
• Sedentary Reminder Function
Method of setting: Press and hold the M key for 5 seconds. After appears, enter the main
menu. Toggle the control panel up or down to locate sedentary reminder function. After locat-
ing the sedentary reminder interface with , press the M key to enter the corresponding
submenu. Toggle the control panel up or down to set the sedentary reminder time. Once
confirming the sedentary reminder time, a confirmation icon will be displayed.
After setting the sedentary reminder time, press the button on the left side of the control
panel to turn on or off the sedentary reminder function. The sedentary reminder function will
not be timed when the desk height is above 39.3 inches. The sedentary reminder function will
be timed when the desk height is 39.3 inches or below. After the sedentary time ends, the
interface alternately displays and at 1.5-second intervals. Prompting you
to raise the desk to your desired height. The sedentary reminder function can also be set on
the APP.
• Low-Power Function
If there is no operation for 10 seconds, it will enter low-power mode, and the hand controller
will display before turning off the screen and going to sleep.
• Memory Key Function
Method of setting: Press the M button located on the right-hand side of the control panel,
and will appear. When the desk is above 35.5 inches, press and hold for M button
1 second, will appear on the screen and the current position will be saved. When
the desk is below or equal to 35.5 inches, press and hold for 1 second, will appear
on the screen and the current position will be saved.
- - -
- - 1
- - 2
There are two presets for the memory function. One for heights greater than 35.5” and one
for lower than 35.5”. After setting the memory function, double push/pull on the control panel
will adjust the table to either memory height 1 or 2.
NOTE: If you don't understand the introduction of the standing desk control-
ler's functions, you can scan the QR code to download the APP. The APP
can also control the standing desk, giving you a smarter experience. Before
using this app on Samsung phones, you need to turn off the built-in Bixby.
02 03 04 05 06 07 08 09 10 11 12
Bekijk gratis de handleiding van ErgoAV ERDS1-01G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ErgoAV |
| Model | ERDS1-01G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3514 MB |
