EQ-3 HMIP-eTRV handleiding

Handleiding

12345678910111213141516171819202122232425262728293031/ 31

Afdrukken

Je bekijkt pagina 28 van 31

54

55

Troubleshooting Restore factory settings

Lock symbol

( )

Operating

lock activated

Deactivate the

operating lock via

the app.

Fast orange

flashing

(during radio

transmission)

Radio

transmission/

attempting to

transmit

Please wait for the

feedback of the

receiver.

1x long green

lighting

Transmission

confirmed

You can continue

operation.

1x long red

lighting

Transmission

failed

Please try again (see

„8.2 Command not

confirmed“ on page

52).

Slow orange

flashing

(every 10

seconds)

Teach-in

mode active

Please enter the last

four numbers of the

device serial num-

ber to confirm (see

„5.1 Teaching-in“ on

page 40).

Short orange

lighting (after

green or red

confirmation)

Batteries

empty

Replace the batter-

ies (see „7 Replacing

batteries“ on page

50).

3x slow red

flashing

Duty cycle

exceeded

(see „8.3 Duty

cycle“ on

page 52) or

device defec-

tive

Please see your app

for error message

or contact your

retailer.

1x orange

and 1x green

lighting (after

inserting bat-

teries)

Test display Once the test

display has stopped,

you can continue.

9 Restore factory settings

The factory settings of the device can be re-

stored. If you do this, you will lose all your set-

tings.

To restore the factory settings of the radiator thermostat,

please proceed as follows:

• Push the battery compartment cover (D) to the

back and downwards to remove it from the de-

vice (see figure 7).

• Remove the batteries.

• Insert the batteries ensuring that the polarity is

correct (see figure 8) while pressing and holding

down the system button (C) for 4s at the same

time, until the LED will quickly start flashing or-

ange (see figure 3).

• Release the system button again.

• Press and hold down the system button again for

4s, until the status LED lights up green.

• Release the system button to finish the procedure.

The device will perform a restart.

12345678910111213141516171819202122232425262728293031/ 31

Bekijk gratis de handleiding van EQ-3 HMIP-eTRV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van EQ-3 (Thermostaat)

Handleiding bekijken

EQ-3 HMIP-BWTH24

Thermostaat - handleiding

Andere merken in Thermostaat