Handleiding
Je bekijkt pagina 3 van 16
Printing a Connection Check Report 3
■ When using TCP/IP, make sure your network’s DHCP option is enabled (your router
manufacturer will be able to assist you with this setting).
■ Print a network status sheet from the product’s control panel. Load a few sheets of
plain paper in your product. Press if necessary, and then do one of the following:
■ WF-2830: Select Settings > Network Settings > Print Status Sheet. Then
press the start button.
■ WF-2850: Select Settings > General Settings > Network Settings > Network
Status
> Print Status Sheet. Then press the start button.
■ Remove and reinstall your product software.
Printing a Connection Check Report
You can print a network connection report and check for any error codes and messages to
solve problems you may encounter with network connections.
1. Load a few sheets of plain paper in your product.
2. Press if necessary, and then do one of the following:
■ WF-2830: Select Settings > Network Settings > Connection Check, and press
the start button.
■ WF-2850: Select Settings > General Settings > Network Settings >
Connection Check > Print Check Report.
3. The connection report prints. Check for any error codes and follow the solutions on
the report.
Below are a few common error codes and solutions. If you do not see your error code listed
here, see the online User’s Guide.
Error code E1: Make sure your router, access point, and/or hub are turned on, and the
network cable is securely connected to your device and to your product.
Error codeMessage or solution
Bekijk gratis de handleiding van Epson WorkForce WF-2850, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Epson |
| Model | WorkForce WF-2850 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 1837 MB |
