Handleiding
Je bekijkt pagina 32 van 40
32 Troubleshooting
11. Click OK.
12. Click
OK again to close the EPSON Scan Settings window.
Note:
If the printer’s IP address changes, you will need to repeat steps 1 through 12
to reconfigure Epson Scan network settings.
You’re ready to scan and print. See your printed documentation and on-screen
Epson Information Center for details.
Troubleshooting
If you have problems setting up or using your product on a network, check these
sections for help:
■ “Setup Problems” below
■ “Printing Problems” on page 34
■ “Scanning Problems” on page 35
This section also explains how to print a Network Status Sheet (see page 36) and
reset network settings (page 37).
Setup Problems
Software installation failed
Reset the printer’s network settings (see page 37) and perform a first time
installation of the printer software. (See page 3 for wireless installations or page 15
for wired installations.)
Cannot connect to or find the wireless router or access point
■ Try connecting to the wireless router or access point with your computer or
another device to confirm that it is working correctly.
■ Make sure that the printer is within range of your wireless router or access
point.
■ Avoid placing the printer near a microwave oven, 2.4 GHz cordless phone, or
large metal object such as a filing cabinet.
Bekijk gratis de handleiding van Epson WorkForce 600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Epson |
| Model | WorkForce 600 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 5490 MB |
