Handleiding
Je bekijkt pagina 237 van 462
237
• Blueprints
• Actual printing stock
• Carrier sheet
* When tracing paper is loaded, the product cannot automatically detect the width of the paper. Make
sure you set the Original Size setting on the Copy menu or the Scan Size setting on the Scan menu to
the size of your original.
Caution: Do not load the following types of originals directly in the scanner, or they may cause paper
jams or damage the scanner:
• Originals that are bound
• Originals that are bent
• Originals with carbon backing
• Originals with staples, paper clips, or glue
• Originals with many holes (such as loose-leaf paper)
• Irregularly shaped originals or originals that are not cut at right angles
• Originals with attached photos, stickers, or labels
• Transparent originals
• Glossy originals
• Torn or deteriorated originals
Parent topic: Using the Integrated Scanner (SureColor T5770DM/T7770DM)
Loading Originals
You can load an original that meets the document specifications in the input slot.
Caution: Do not load photos, valuable original documents, or artwork directly into the product. This may
wrinkle or damage the original.
Note: If the original is curled or creased, straighten or smooth the irregularity before loading the
document into the product. If there is any dust or dirt on the original, make sure to remove it before
loading the document into the product. Otherwise, the quality of the scanned image may decrease. If the
original is longer than 39 inches (1 meter), support the document with your hand during scanning.
Bekijk gratis de handleiding van Epson SureColor T7770DM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Epson |
| Model | SureColor T7770DM |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 41073 MB |
