Epson SureColor SC-T3700E handleiding

Printer

Epson

256 pagina's

PDF beschikbaar

Handleiding

/ 256

Je bekijkt pagina 22 van 256

❏ Store the printer after confirming that the

print head has been capped (the print head is

positioned at the far right). If the print head is left

uncapped for a long time, the print quality may

decline.

Note:

If the print head is not capped, turn the printer on, and

then turn it off.

❏ To prevent the accumulation of dust and other

foreign matter in the printer, close all covers

before placing it in storage.

If the printer will be not be used for an extended

period, protect it with an anti-static cloth or other

cover.

The print head nozzles are very small, and they

can become clogged easily if fine dust gets on

the print head, and you may not be able to print

properly.

❏ When turned on after an extended period of

disuse, the printer may automatically perform

head cleaning to ensure print quality.

U “Print Head Maintenance” on page176

❏ When moving, transporting, or storing the printer

in an environment below -10˚C, contact your

dealer or Epson Support.

(SC-P8500DL Series/SC-T7700DL Series only)

Notes when using the control

panel

❏ Touch the panel with your finger. It will only react

when you touch it with your finger.

❏ It may not react when operated with something

other than a finger, when operated with wet

fingers or gloved hands, or when operated when

there is a protective sheet or sticker on the panel.

❏ Do not operate with sharp objects such as

ballpoint pens or mechanical pencils. Doing so

could damage the control panel.

❏ If the panel gets dirty, wipe it with a soft cloth. If

the panel is particularly dirty, dampen the cloth

with water containing a small amount of neutral

detergent, firmly wring the cloth dry before using

it to wipe the panel, and then finish by wiping

with a soft, dry cloth. Never use volatile chemicals

such as thinner, benzene, or alcohol. Doing so

could damage the surface of the control panel.

❏ Do not use in an environment that is subject

to sudden changes in temperature or humidity.

Condensation may form inside the panel, causing

a decline in performance.

❏ Some pixels on the screen may not light

up or may light up constantly. Also, due to

the characteristics of the liquid crystal display,

uneven brightness may occur, but this is not a

malfunction.

Notes on handling ink

cartridges (only for models

with ink cartridges)

Note the following points when handling ink

cartridges to maintain good print quality.

❏ The supplied ink cartridges and Maintenance

Boxes are for use during the initial charging.

Prepare replacement ink cartridges and

Maintenance Boxes in advance.

❏ We recommend that ink cartridges be stored at

room temperature out of direct sunlight and used

before the expiry date printed on the packaging.

❏ To ensure good results, we recommend that all

the ink in the cartridge be used within a year of

installation.

❏ Ink cartridges that have been stored at low

temperatures for an extended period should be

allowed to return to room temperature over a

period of four hours.

❏ Do not touch the IC chips on the ink cartridges.

You may not be able to print properly.

❏ Install ink cartridges into all slots. You cannot

print if any of the slots are empty.

SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-T3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide

Introduction

/ 256

Bekijk gratis de handleiding van Epson SureColor SC-T3700E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.