Handleiding
Je bekijkt pagina 61 van 259
61
Setting Description
Platen Gap Set the distance between the printhead and the
paper; choose a wider setting if prints are
frequently scratched or smudged.
Top/Bottom Margins Select the margin for the leading/trailing edges of
the printed image. Depending on the paper type
and printing environment, colors may be uneven
near the leading edge if the margin is small.
Margin Between Pages Select to set the margins between pages when
printing multiple pages without using auto cut for
roll paper.
Paper Suction Select to adjust the printer's suction setting;
choose lower values for thinner papers.
Back Tension Adjust the roll tension setting if paper gets wrinkled
during printing.
Drying Time per Pass Set the amount of time the printer pauses to allow
drying after each pass.
Drying Time per Page Set the amount of time the printer pauses to allow
drying after each printed page.
Paper Size Check Select On to automatically detect the paper width
when paper is loaded.
Select Off when the paper roll is empty. This
allows you to set the paper width before feeding
the paper.
Auto Cut Select Follow Paper Source Settings to follow
the cut settings in General Settings > Printer
Settings > Paper Source Settings > Roll Paper
Setup > Cut Settings > Auto Cut in the menu
on the printer control panel.
Select Never Cut to cut paper manually.
Skew Reduction Turn this off if the front edge of thin paper or softer
paper folds.
Roll Core Diameter Select the paper core size for the loaded roll
paper.
Bekijk gratis de handleiding van Epson SureColor SC-P20570, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Epson |
| Model | SureColor SC-P20570 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 20338 MB |
