Handleiding
Je bekijkt pagina 34 van 259
34
Note: The Auto Cut setting in the printer driver takes priority over the setting in the control panel.
The printer driver setting returns to automatic cutting when you close the application.
• If you are using a paper type that cannot be cut with the built-in cutter, turn off the setting in the
control panel. From the roll paper information area, select Cut Settings > Auto Cut > Off.
2. Print your file.
3. Select the icon.
4. Do one of the following:
• If you want to move the paper into a different cutting position, press and hold the or icon
until the cut location reaches the cutting position labeled on the printer, and then select Cut.
• If you don't need to reposition the paper, select Cut to cut the paper with the built-in cutter.
Note: The minimum length of paper you can cut with the built-in cutter is 2.36 in. (60 mm) or 5 in.
(127 mm), depending on the paper type. These minimum lengths cannot be changed. Paper is
automatically fed if the length is shorter than the minimum. Cut any excess paper by hand, as
necessary.
Bekijk gratis de handleiding van Epson SureColor SC-P20570, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Epson |
| Model | SureColor SC-P20570 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 20338 MB |
