Handleiding
Je bekijkt pagina 33 van 52
Cleaning the Print Head 33
Cleaning the Print Head
If print quality has declined and the nozzle check indicates clogged nozzles, you
can clean the print head. Print head cleaning uses ink, so clean it only if necessary.
Note:
You cannot clean the print head if an ink cartridge is expended, and may not be able to
clean it when a cartridge is low. You must replace the cartridge first (see page 36).
1. Load letter-size plain paper in the sheet feeder.
2. Press the
Setup button.
3. Select
Maintenance and press OK.
4. Select
Head Cleaning and press OK.
5. Press x
Start.
Cleaning lasts around 1 minute. When it’s finished, you see a message on the
display screen.
Caution:
Never turn off the printer during a cleaning cycle or you may damage it.
6. Press x Start to run a nozzle check and confirm that the print head is clean.
Note:
If you don’t see any improvement after cleaning the print head three times, turn off
your all-in-one and wait at least six hours to let any dried ink soften. Then try printing
again.
If you do not use your all-in-one often, it is a good idea to print a few pages at least once
a month to maintain good print quality.
Bekijk gratis de handleiding van Epson Stylus CX9400Fax, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Epson |
| Model | Stylus CX9400Fax |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 5659 MB |
