EPEVER Tracer 3210AN handleiding
Handleiding
Je bekijkt pagina 17 van 40
13
No charge
Charging
PV array's voltage, current, and generate
energy
Battery
Battery capacity, In charging
Battery Voltage, Current, Temperature
Battery type
Load
Load ON
Load OFF
Current/Consumed energy/Load mode
2） Error codes
Status
Icon
Instruction
Battery
over-discharged
Battery level shows empty, battery frame
blink, fault icon blink
Battery over voltage
Battery level shows full, battery frame
blink, fault icon blink
Battery overheating
Battery level shows current value, battery
frame blink, fault icon blink
Load failure
Overload
①
, Load short circuit
① When the load current reaches1.02-1.05 times, 1.05-1.25 times, 1.25-1.35 times, and 1.35-1.5 times
more than the rated value, the controller will automatically turn off the loads in 50 seconds, 30
seconds,10 seconds, and 2 seconds respectively.
3
） Browse interface
Press the SELECT button to cycle display the following interfaces.
Bekijk gratis de handleiding van EPEVER Tracer 3210AN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EPEVER |
| Model | Tracer 3210AN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4262 MB |
