EPEVER Tracer 3210AN handleiding
Handleiding
Je bekijkt pagina 15 van 40
11
than 150 mm.
If an inverter is to be connected to the system, connect the inverter directly to
the battery, not to the load side of the controller.
Step 3：Grounding
Tracer-AN series are common-negative controllers. Negative terminals of the PV array, the battery, and
the load can be grounded simultaneously, or any negative terminal is grounded. However, according to
the practical application, the negative terminals of the PV array, battery, and load can also be
ungrounded. However, the grounding terminal on its shell must be grounded. It shields electromagnetic
interference and avoids electric shock to the human body.
CAUTION
It is recommended to use a common-negative controller for common-negative
systems, such as the RV system. The controller may be damaged if a
common-positive controller is used and the positive electrode is grounded in the
common-negative system.
Step 4：Connect accessories
Connect the temperature sensor
(Model: RT-MF58R47K3.81A) (Model: RTS300R47K3.81A)
Connect one end of the remote temperature sensor cable to the interface ③ and place the other end
close to the battery.
CAUTION
Suppose the remote temperature sensor is not connected to the controller or is
damaged. In that case, the controller will charge or discharge the battery at the
default 25 ºC (no temperature compensation).
Connect the accessories for RS485 communication
Refer to 3.3 "Setting."
CAUTION
The internal circuit of the RS485 port has no isolation design. Connecting an
RS485 communication isolator to the port is recommended before communicating.
Step 5：Power on the controller
Connect the battery fast-acting fuse to power the controller. Check the battery indicator status (the
controller operates normally when the indicator is lit green). Connect the fast-acting fuse and circuit
breaker of the load and PV array. Then the system will be operating in preprogrammed mode.
CAUTION
If the controller is not operating properly or the battery indicator shows an
abnormality, please refer to 4.2 "Troubleshooting."
Included Accessory:
Optional Accessory:
Bekijk gratis de handleiding van EPEVER Tracer 3210AN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EPEVER |
| Model | Tracer 3210AN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4262 MB |
