EPEVER Tracer 2210AN handleiding
Handleiding
Je bekijkt pagina 28 van 40
24
Battery over
voltage
Check whether the battery voltage is
higher than OVD (over voltage
disconnect voltage) and disconnect the
PV array connection.
Battery over
discharged
① When the battery voltage is restored to
or above LVR (low voltage reconnect
voltage), the load will recover.
②Take other ways to recharge the
battery.
Battery
overheating
While the temperature declines below
55 ºC, the controller will resume.
Overload
1. Load off
2
① Please reduce the number of electric
devices.
② Restart the controller or press the
button to clear faults.
Load short-circuit
① Check carefully loads connection,
clear the fault,
② Restart the controller or press the
button to clear faults.
① When the load current goes higher than 1.02-1.05 times, 1.05-1.25 times, 1.25-1.35 times, and
1.35-1.5 times the rated value, the controller may automatically turn offloads in 50 seconds, 30
seconds,10 seconds, and 2 seconds respectively.
Battery frame blink,
fault icon blink
Battery frame blink,
fault icon blink
Battery frame blink,
fault icon blink
Load and fault
Bekijk gratis de handleiding van EPEVER Tracer 2210AN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EPEVER |
| Model | Tracer 2210AN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4262 MB |
