EPEVER Tracer 2210AN handleiding
Handleiding
Je bekijkt pagina 24 van 40
20
Equalize Charging Voltage＝Boost Charging Voltage ≥ Float Charging Voltage>Boost Reconnect
Charging Voltage;
C. Low Voltage Reconnect Voltage > Low Voltage Disconnect Voltage ≥ Discharging Limit Voltage.
D. Under Voltage Warning Reconnect Voltage>Under Voltage Warning Voltage≥ Discharging Limit
Voltage;
E. Boost Reconnect Charging voltage> Low Voltage Reconnect Voltage;
F. Low Voltage Disconnect Voltage ≥ Over Discharging Protection Voltage (BMS)+0.2V
CAUTION
The required accuracy of BMS is no higher than 0.2V. We will not assume
responsibility for the abnormal when the accuracy of BMS is higher than 0.2 v.
3.3.4 Load modes
When the LCD shows the above interface, operate as follows:
Operation:
Step1: Press the SELECT button to jump to the load type interface.
Step2: Press and hold the ENTER button until the load type interface flashes.
Step3: Press the SELECT button to modify the load type.
Step4: Press the ENTER button to confirm.
1. Load mode list
1**
Timer 1
2**
Timer 2
100
Light ON/OFF
2 n
Disabled
101
The load will be on for 1 hour since
sunset
201
The load will be on for 1 hour
before sunrise
102
The load will be on for 2 hours
since sunset
202
The load will be on for 2 hours
before sunrise
103~113
The load will be on for 3 ~13 hours
since sunset
203~213
The load will be on for 3 ~13 hours
before sunrise
114
The load will be on for 14 hours
since sunset
214
The load will be on for 14 hours
before sunrise
115
The load will be on for 15 hours
since sunset
215
The load will be on for 15 hours
before sunrise
Bekijk gratis de handleiding van EPEVER Tracer 2210AN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EPEVER |
| Model | Tracer 2210AN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4262 MB |
