EPEVER Tracer 2210AN handleiding
Handleiding
Je bekijkt pagina 19 van 40
15
Step1: Press the SELECT button to jump to the battery voltage interface.
Step2: Press and hold the ENTER button until the battery-type interface flashes.
Step3: Press the SELECT button to change the battery type, shown below:
Step4: Press the ENTER button to confirm.
3. Remote set the battery parameters
1) Setting the battery parameters by PC software
Connect the controller's RJ45 interface to the PC's USB interface via a USB to RS485 cable. When
selecting the battery type as "USE," set the voltage parameters by the PC software.
2) Setting the battery parameters by APP
Connect the controller to an external WIFI module or Bluetooth module through a standard network cable.
End-users can set the voltage parameters by the APP after selecting the battery type as "USE." Refer to
the cloud APP manual for details.
Bekijk gratis de handleiding van EPEVER Tracer 2210AN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EPEVER |
| Model | Tracer 2210AN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4262 MB |
