EPEVER Tracer 10420AN handleiding
Handleiding
Je bekijkt pagina 19 van 36
15
3） Error codes
Status
Faults
Indicator
Charging
indicator
Symbol
Instruction
Battery over
discharged
Red ON
solid
--
Battery level shows empty,
battery frame blink, fault icon
blink.
Battery over
voltage
Red Slow
flashing
--
Battery level shows full, battery
frame blink, fault icon blink.
Battery over
heating
Red slowly
flashing
--
Battery level shows current
value, battery frame blink, and
fault icon blink.
Controller over
temperature
Red slowly
flashing
Green slowly
flashing
Battery level shows current
value, battery frame blink, and
fault icon blink.
System voltage
error
Red slowly
flashing
Fast flashing
in green
Battery level shows current
value, battery frame blink, and
fault icon blink.
3.4 Setting
1) Clear the generated energy
In the PV power interface, long-press the "ENTER" button until the value flashes. Then it enters the reset
mode; press the "ENTER" button again to confirm and reset.
2) Switch the battery temperature unit
In the battery temperature interface, long-press the "ENTER" button to switch the unit.
3) Battery type
① Support battery types
Lead-acid
battery
Sealed(default)
Gel
Flooded
User
Lithium battery
LiFePO4 (4S/12V; 8S/24V; 15S/48V; 16S/48V)
Li(NiCoMn)O2 (3S/12V; 6S/24V; 7S/24V; 13S/48V; 14S/48V)
User
Modify the battery type as LiFePO4 or Li(NiCoMn)O2 under the "User" battery type.
Bekijk gratis de handleiding van EPEVER Tracer 10420AN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EPEVER |
| Model | Tracer 10420AN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4047 MB |
