EPEVER DR3210N handleiding
Handleiding
Je bekijkt pagina 15 van 34
12
www.solarv.de
Copyright © 2021 SolarV GmbH
Step1: Determine installation location and heat-dissipation space
Determination of installation location: The controller shall be installed in a place with
sufficient air flow through the radiators of the controller and minimum clearance of
150mm from the upper and lower edges to ensure natural thermal convection.
CAUTION: Ensure that the controller is able to dissipate heat if it’s installed in a
closed area. If the controller is to be installed in an enclosed box, it is important to ensure
reliable heat dissipation through the box.
Step2: Wiring
❶❷❸
Connect the system in the order of❶Starter batteryBATT2 →❷Main battery BATT1
→❸PV array in accordance with the above diagram anddisconnect the system in the
reverse order❸❷❶.
CAUTION: The BATT1 and BATT2 must be set at same voltage level, and other
situations are not supported for the moment.
CAUTION: Follow the above instruction for wiring, otherwise, it may cause the BATT2
system voltage identification error.
Bekijk gratis de handleiding van EPEVER DR3210N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EPEVER |
| Model | DR3210N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5618 MB |
