EPEVER DR2210N handleiding
Handleiding
Je bekijkt pagina 27 van 34
24
www.solarv.de
Copyright © 2021 SolarV GmbH
4.2 Troubleshooting
Faults
Possible reasons
Troubleshooting
Charging LED indicator off
during daytime when sunshine
falls on PV modules properly
PV array
disconnection
Confirm that PV wire
connections are correct and
tight.
Wire connection is correct but
the controller is not working.
Battery voltage
is lower than
8.5V
Please check the voltage of
battery. At least 8.5V voltage to
activate the controller.
Red fast flashing
Battery level shows full
battery frame blink
fault icon blink
BATT1over
voltage
Check if battery voltage is
higher than OVD (over voltage
disconnect voltage), and
disconnect the PV.
red on solid
Battery level shows empty
battery frame blink
fault icon blink
BATT1over
discharged
When the battery voltage is
restored to or above LVR(low
voltage reconnect voltage), the
load will recover
Red fast flashing
Battery level shows
current capacity,
battery frame blink,
fault icon blink, the
temperature icon
blink,
the temperature
value blink,
the temperature unit blink.
BATT1
Overheating
The controller will
automatically turn the system
off. When the temperature
declines to be below 55 ºC, the
controller will resume.
Red Fast flashing
Green Fast flashing
BATT1 System
voltage error
①Check whether the battery
voltage match with the
controller working voltage.
②Please change to a
suitable battery or reset the
working voltage.
①System alarm system
voltage error when using
Lead-acid battery
②System alarm an over
discharge fault when the
③BATT1 is 12V but set as 24V
System alarm an over-voltage
fault when BATT1 is 24V but
set as 12V
Incorrect wiring
steps should not
connect BATT1
first and then
BATT2
①Disconnect the system,
and reconnect the BATT2
first, then reconnect BATT1
②BATT1 voltage level should
be the same as BATT2
Bekijk gratis de handleiding van EPEVER DR2210N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EPEVER |
| Model | DR2210N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5618 MB |
