EPEVER DR2210N handleiding
Handleiding
Je bekijkt pagina 14 van 34
11
www.solarv.de
Copyright © 2021 SolarV GmbH
CAUTION: The wire size is only for reference. If there is a long distance between
the PV array and the controller or between the controller and the battery. Larger size
wires can be used to reduce the voltage drop and improve performance.
CAUTION: The battery cable size recommendations assume that the charge
controller is the only device connected to this cable (no inverter connected to the
same cable etc).
2.4 Mounting
WARNING: Risk of explosion. Never install the controller in a sealed enclose with
flooded batteries. Do not install in a confined area where battery gas can accumulate.
WARNING: Risk of electric shock. When wiring the solar modules, the PV array
can produce a high open circuit voltage, so turn off the breaker before wiring
and be careful when wiring.
CAUTION: The controller requires at least 150mm of clearance above and below
for proper air flow. Ventilation is highly recommended if mounted in an enclosure.
Installation steps
Bekijk gratis de handleiding van EPEVER DR2210N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EPEVER |
| Model | DR2210N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5618 MB |
