Enttec S-Play Nano handleiding
Handleiding
Je bekijkt pagina 7 van 35
S-PLAY NANO (70095)
Visit the ENTTEC website for the latest version.
..
7|
ID: 5950772
USER MANUAL
Document Updated: Dec 2023
Connection to DMX XLR Connector
GND
V+
12~24V DC
PSU & Protection
3-Pin 5-Pin
GND
Data +
Data -
1
3
2
1
2
3
4
5
Data+ / DMX+
VCC / V+
0 V / GND
Data- / DMX-
XLR Connectors
Connection to Relay
The S-PLAY NANO is equipped with a relay designed for use with low power devices and to provide
switching logic for higher power contactors.
To ensure a safe installation it is imperative that the power connected to the S-PLAY NANO’s relays is
within their operating limits.
The S-PLAY NANO’s relay specifications are as follows:
To calculate to total power your circuit will pass through the relay, multiply the circuit voltage by the
current you intend to pass through it. This value must be lower than 60W. In other words, Voltage x
Current ≤ 60W.
If your application requires main power switching or high current applications, ENTTEC recommends the
use of a DMX switch pack controlled by the S-PLAY NANO’s DMX output or wire the S-PLAY NANO’s relay
outputs to connect to the primary coil of a DIN mount high powered relay or contactor.
Maximum Current Rating
2A
Maximum Voltage Rating
50V DC
Total switchable power of each S-PLAY NANO relay
60W
Example 1
Example 2
Example 3
Current
1.2A
2A
2A
Voltage
50V
30V
50V
Maximum Power
60W
60W
100W
Bekijk gratis de handleiding van Enttec S-Play Nano, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Enttec |
| Model | S-Play Nano |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5605 MB |
